Jitrakor RC

An open synthetic carrier tissue, fully impregnated and coated on both sides with a petrolatum based anticorrosion mass, containing extra polymers, mineral additives and corrosion inhibitors. The external side of the tape is covered with a transparent polyethylene film in PVC.

Main advantages :

Mass impregnating the metal, for flawless protection against corrosion
Thanks to its PVC film, the tape tightens on the pipe under the effect of the heat (hot water)
No primer required
Little preparation of the surface, no sandblasting needed
Cold application

High temperature version - EN 12068 approved - Class AHT - 100°C

Demander un devis

Approval

The Jitrakor RC is UBAtc approved according to EN 12068-A HT (100) approval 07/2389 : for more informatin, cf. Approval Datasheet.

Application

Protection against the corrosion of pipes, joints, special parts, and all metal structures used to transport hot liquidS, placed in a hot environment, recessed, in a screed of buried.

Characteristics

	value	unit	standard
Colour	red
Weight	1,4	kg/m²
Thickness	1,2	mm	EN 12068
PVC film thickness	35	µm
Tensile strength	9	N/mm	EN 12068
Elongation at break	12	%	EN 12068
10 % elongation module	8	N/mm	EN 12068
Specific insulation resistance (2 layers)	10⁹	Ω.m²	EN 12068
Peel resistance under the effect of cathodic protection (cathodic disbanding)	8	mm (r.equiv.)	EN 12068
Dielectric strength	10	kV/mm	EN 12068
Application temperature	+10 à +45	°C
Operating temperature	-30 à +100	°C

Some photos

Retour à la liste