Jitraflex 573

An open synthetic carrier tissue, fully impregnated and coated on both sides with a petrolatum, based anticorrosion mass, containing extra polymers, mineral, additives and corrosion inhibitors. The external side of the tape is covered with a transparent polyethylene film 0.05 mm thick.

Main advantages :

No primer required
Good protection against corrosion : the mass "wets" perfectly the surface of the metal
Easily applied tape, esay cold application
Little preparation of the surface, sandblasting not necessary.

With an exterior PE film - EN 12068 approved

Demander un devis

Approval

The JITRAFLEX 573 (2 layers) + JITRANYL (2 layers) system is approved according to EN 12068-A30 : for more information cf. Technical datasheet.

Application

Protection against the corrosion of pipes, joints, special parts, and all underground metal structures. Compatible with all factory coatings.

Characteristics

	value	unit	standard
Colour	light grey
Weight	1,3	Kg/m²
Thickness	1,2	mm
Film thickness	0,050	mm
Tensile strength	9	N/mm	EN 12068
Elongation at break	12	%	EN 12068
Specific insulation resistance (2 layers)	10⁹	Ω.m²	EN 12068
Saponification index	< 10	mg KOH/g	EN 12068
Résistance au décollement sous l'effet de la protection cathodique (Cathodic disbonding).	6	mm (r. equiv.)	EN 12068
Rigidité diélectrique	10	kV/mm	EN 12068
Température d'application	+5 à +35	°C
Température d'utilisation	-30 à +65	°C

Some photos

Retour à la liste