Jitra Paste

Paste composed of hydrocarbons derived from petrol with added polar compounds and corrosion inhibitors.

Main advantages :

It is applied by brush or by hand at normal temperature

Demander un devis

Application

Preparation of already corroded metal surfaces before JItra tapes are applied. Primer required before the JITRA tapes ar applied if galvanised steel or copper is used. Greasing and corrosion protection of valves rarely operated, nuts, tensionners, etc. Temporary protection of metals during their storage or transport.

Characteristics

	Value	Standard
Density	1.01	g/cm³
Dropping point according to Ubbelhode	40	°C
Penetration at 25 °C	295	mm
Viscosity (Brookfield RVT - 50 t/min)
- à 55 °C	800	mPa.s
- à 65 °C	170	mPa.s
- à 85 °C	45	mPa.s

Some photos

Retour à la liste